Ένα φάνκι ρολόι είναι το τέλειο διακοσμητικό για κάθε σπίτι. Μπορείτε να προσθέσετε το δικό σας στυλ με χρώματα της επιλογής σας. Απλά ακολουθήστε τις οδηγίες βήμα βήμα
-
First, it’s time to create the stencil for the clock outline. Using your compass and pencil, mark out a circle with 20cm diameter.
-
Space the points of the compass at the radius of the circle (10cm). Then, using the compass, mark pencil dots 10cm apart around the outline of the circle.
-
Using your ruler and pencil, draw straight lines between each of the dots to create a hexagonal shape.
-
You now have your hexagonal cutting stencil.
-
Using the straight wood cutting setting on your Jigsaw (KS901SEK shown) and cut around the hexagonal stencil lines.
-
You now have the back piece for your wall clock.
-
Using sand paper, smooth the edges to remove any rough areas to ensure you have a perfect hexagonal shape.
-
Mark a point on each of the hexagonal faces exactly half way between each of the corners. Six points in total.
-
Secure the plywood to your workbench and drill 40mm deep holes on each of the six corners and through the six pencil marks you’ve just created.
-
You now have twelve evenly-spaced holes around the hexagon.
-
Using the second, thinner piece of plywood, draw around the edges of the hexagon you’ve already created to mark out your clock face stencil.
-
Carefully cut around the clock face template using the Jigsaw.
-
Drill a hole into the back board in a central position. This will be used when you attach the clock to the wall.
-
Drill a hole into the centre of each of the twelve ping pong balls.
-
Paint the ping pong balls in colours of your choice.
-
Secure each cocktail stirrer into position using your work bench.
-
Select the metal cutting setting on your Jigsaw. Cut the ends off each cocktail stirrer, leaving twelve metal sticks of equal length.
-
Drill a hole into the centre of the clock face.
-
Paint the clock face in a colour of your choice.
-
Mark out the measurements for attaching your clock mechanism to the back piece of your clock and drill a hole.
-
Add a screw to the hole to attach your clock mechanism.
-
Place the clock mechanism through the hole in the clock face.
-
Attach the clock hands to the mechanism on the front of the display, and add the ping pong balls to each of the twelve metal stirrers.
-
Add glue to each of the holes and to the ends of each of the cocktail stirrers.
-
Push the cocktail stirrers into each hole as far as they will go.
-
Hang the clock on your wall and you’re done.
Ρολόι Τοίχου